Guest Room Nursery Combo: Keep the Guest Bed and Add a Crib

Guest Room Nursery Combo: Keep the Guest Bed and Add a Crib

This post contains affiliate links. As an Amazon Associate I earn from qualifying purchases.

A guest room nursery can keep the guest bed and add a crib. Below are three to-scale wall plans, with sizes, heights and safety checks.

In this article (8 sections)
  1. All 3 Setups Side by Side
  2. Setup 1: The Daybed Wall
  3. Setup 2: The Murphy Bed Wall
  4. Setup 3: The Renter Crib Wall
  5. Before You Buy: Measure in 5 Minutes
  6. Install Heights at a Glance
  7. Safety for a Crib in a Guest Room
  8. Frequently Asked Questions

All 3 Setups Side by Side

Here are all three walls drawn to the same scale, so you can see which one fits your room.

All 3 setups side by side to scale: The Daybed Wall (178-inch wall), The Murphy Bed Wall (186-inch wall), The Renter Crib Wall (102-inch wall)
All 3 setups drawn to one scale. The numbers match each setup's shop cards.

Setup Wall Pieces Drilling Best for
1: Daybed Wall 178 in 3 Anchor only Roomy wall
2: Murphy Bed Wall 186 in 4 Hook rail, anchors Small footprint
3: Renter Crib Wall 102 in 3 Dresser anchor; hooks adhesive Renters

Setup 1: The Daybed Wall

To-scale diagram of The Daybed Wall: 1 daybed (your own), 2 mini crib (your own), 3 changer dresser
The Daybed Wall: every piece drawn at its listed size on a 178-inch wall. The numbers match the shop cards below.

Shop this setup

3. Changer dresser

CHUWELL 3-drawer oak dresser

31.5" W x 15.7" D x 31.5" H · Oak

View on Amazon

The daybed (1) stays made and ready for guests, so there’s no nightly setup. The mini crib (2) sits in the middle of the wall, with a walkway on each side for easy lifts.

The changer dresser (3) holds diapers and guest towels in separate drawers, so one piece does both jobs. For more drawer ideas, see nursery organization for small rooms.

Hang itNothing goes on the wall above the daybed or the crib. The 31.5-inch dresser (3) stands on the floor, anchored to the wall with its anti-tip kit.

Setup 2: The Murphy Bed Wall

To-scale diagram of The Murphy Bed Wall: 1 murphy bed (your own), 2 full crib (your own), 3 changer dresser, 4 hook rail
The Murphy Bed Wall: every piece drawn at its listed size on a 186-inch wall. The numbers match the shop cards below.

Shop this setup

3. Changer dresser

Furniway 3-drawer walnut dresser

31.5" W x 15.7" D x 28.5" H · Walnut

View on Amazon

4. Hook rail

GWAAZXGZ 5-hook T rail

16.5" W x 1.8" D x 1.9" H · Black

View on Amazon

By day the Murphy bed (1) folds up and the floor belongs to the baby. At night it opens to a full guest bed, and the 55-inch full crib (2) stays well clear of it.

The hook rail (4) sits above the changer dresser (3), out of the way of both beds. Keep it for light things, like a sun hat or a light cardigan. Nothing with dangling straps or cords goes here, and heavy or bulky items such as a baby carrier or a tote belong elsewhere. Never leave the baby alone on the changer.

Hang itMount the hook rail (4) with its bottom edge 56 inches above the floor, over the dresser only. The Murphy bed (1) goes into wall studs exactly as its instructions say, ideally installed by a professional. Leave the floor in front of it clear before you open it, keep the bed’s safety latch engaged, and keep children clear while it opens or closes. Anchor the dresser (3) with its anti-tip kit.

Setup 3: The Renter Crib Wall

To-scale diagram of The Renter Crib Wall: 1 full crib (your own), 2 changer dresser, 3 adhesive hooks
The Renter Crib Wall: every piece drawn at its listed size on a 102-inch wall. The numbers match the shop cards below.

Shop this setup

2. Changer dresser

RoyalCraft fluted white dresser

31.5" W x 15.8" D x 29.5" H · White

View on Amazon

3. Adhesive hooks · use 3

Paoli adhesive wall hook

2" W x 1.7" D x 3.1" H · Black

View on Amazon

This wall is all baby. The full crib (1) sits at the left end, with the white changer dresser (2) beside it, and the pull-out trundle lives on the opposite wall.

Three adhesive hooks (3) take light things like a hat, a bib bag or a sweater. They peel off cleanly when the lease is up.

A pulled-out trundle on the opposite wall needs about 36 inches of floor in front of it.

Hang itStick the adhesive hooks (3) with their bottom edge 56 inches above the floor, over the dresser (2) and away from the crib (1). Follow the strip’s weight limit and keep the load light, so nothing can fall onto the changing surface. Check the strips after a week.

Anchor the dresser (2) to the wall with its anti-tip kit. Ask your landlord about the two small screw holes, or use a renter-approved anti-tip strap. Never leave it unanchored.

Need the crib somewhere other than a wall? Nursery Layout When the Crib Can’t Go Against a Wall covers the odd-shaped rooms.


Guest Room Nursery Combo Planner preview

Free printable · 6 pages

Guest Room Nursery Combo Planner

A bed decision worksheet (daybed vs murphy vs trundle), a to-scale 10x10 and 10x12 room planner with cut-out furniture, a crib placement and monthly safety check, a closet and storage split, nursery-mode and guest-mode reset cards with a guest-sheets label, and a three-tier budget planner.

Free. Your download link appears right here. You'll also join the Monthly Home Reset. Unsubscribe anytime. Privacy


Before You Buy: Measure in 5 Minutes

Bar chart of the three wall widths, 178, 186 and 102 inches, plus the 36-inch walkway to keep clear
Compare your wall to these three widths, and keep about 36 inches of clear floor.

  • Wall width: Measure end to end and compare it to the 178, 186 and 102-inch walls above.
  • Door swing: Make sure the door opens fully without touching the crib or dresser.
  • Walkway: Keep about 36 inches of clear floor from the door to the crib and the bed.
  • Outlets and switches: Note where they are, since a dresser or bed can block them.
  • Wall type and drilling: Check whether your lease allows screws. Even in Setup 3 the dresser needs an anti-tip anchor; only the hooks are adhesive.

Install Heights at a Glance

Piece Height to bottom edge
Hook rail (4), Setup 2 56 in
Adhesive hooks (3), Setup 3 56 in
All three changer dressers Anchor with the maker’s anti-tip kit, into wall studs where possible
Murphy bed (1), Setup 2 Mount into wall studs per the maker’s instructions

Safety for a Crib in a Guest Room

Do and don't list for a crib in a guest room: crib sleep only, no adult beds, no guest bedding, no recalled cribs
The baby sleeps only in the crib, and guest bedding stays out of it.

Safety firstAnchor all three dressers with their anti-tip kits, and mount the Murphy bed into wall studs exactly as its instructions say. The baby sleeps only in the crib, never on the daybed, the Murphy bed or any adult bed. Keep guest pillows and blankets away from the crib. Stop using the crib once the child can climb out or reaches the maker’s height limit.

  • Anchor every changer dresser in all three setups, whatever its height, and secure the Murphy bed to the wall studs.
  • Hang nothing on the wall above a crib or bed, and keep anything heavy off the wall above any seat. More on this in safe wall decor for kids’ rooms.
  • Use hooks with rounded tips, and keep them to light loads.
  • A crib holds only a firm, flat, snug-fitting mattress and a fitted sheet, with no bumpers, pillows or blankets. Keep it away from windows, cords and climbable furniture.
  • Any crib, including a mini crib, must meet current CPSC standards. Skip a secondhand crib that is recalled, drop-side or missing parts.
  • Keep dresser-top items out of a standing baby’s reach. Lower the mattress as the baby grows.
  • If you add a mirror within a child’s reach, make it shatter-resistant.

Guest Room Nursery Combo: Keep the Guest Bed and Add a Crib (Pinterest image: Guest Room Nursery Combo: Keep the Guest Bed and Add a Crib)
Want this for later? Save it to Pinterest.

Frequently Asked Questions

Can a crib go in a guest room?

Yes, for a crib that lives there part-time or after the first 6 months (see the sleep answer below). Give it its own wall, away from windows and cords, and keep the guest bed and the crib from touching. Aim for about 36 inches of clear floor on the open sides of the crib, so lifting the baby is easy.

What’s the best guest bed to pair with a crib?

It depends on your floor space. A daybed stays made, a Murphy bed frees the floor by day, and a trundle tucks away entirely. Setup 1 shows a daybed, Setup 2 a Murphy bed, and Setup 3 pairs the crib wall with a trundle on the opposite wall.

How much space do I need for a guest room nursery?

Plan for the crib, a changer dresser and the bed, plus about 36 inches of walkway. The tightest wall here is 102 inches, with the bed on the opposite wall.

Should the baby sleep in the guest room?

The AAP recommends the baby sleep in the parents’ room, in their own crib with a firm, flat mattress, ideally for at least the first 6 months. Never put the baby to sleep on the daybed, Murphy bed or any adult bed. When a guest uses the bed, keep guest pillows and blankets away from the crib.

Pick your wall and measure before you buy.

Related: the baby proofing guide for the whole home, small nursery ideas, multi-functional furniture for families and Linen Closet Organization for Families.

Similar Posts